Porting mods to the PS2 BOR

TN

New member
Hi there!

As a happy owner of PS2 , i alaways wished to play some of my favorite mods on this console. I heard about the existence of PS2 BOR , so , i knew , that it's possible.
And , after a few years of searching aroud the Internet , i finally found a PS2 Openbor port here: https://mundowiihack.wordpress.com/2018/12/18/bor-ps2/

There's also some playable MODs , showing that this version of engine is really works , and even instruction , showing how to optimize MODs to PS2.
But now , i have 2 problems: The instructions are in portuguese/spanish , and i'm a total noob at BOR modding.

I tried to load Final Fight X , but there's an error , showing that some "colourselect" command is not understood. At least , it runs "Rage of The Streets"...

So , i know that there are experts in BOR modding , that surely can optimize some great MODs , for the joy of all PS2 owners. And so , i post all this interesting material for your research here. Anyway , thanks for your attention and sorry for bad English...
 
Welcome to the forum.

This BOR port was part of the original project, before becoming OpenBOR. Therefore (and due to the limitations of the Playstation 2), OpenBOR does not work on PS2 and this port has been discontinued. And with that, our support for this port (and all others that were discontinued) was terminated.

I remember the last time I said this, a person - if I'm not mistaken, was the author of that blog - was angry with me (and other things I prefer not to comment) for not understanding what I said. To be clear: I do not want to discourage anyone from doing this - feel free to use this old version of PS2. But it's something I do not recommend because it is extremely limited (to the point that I do not remember even a single game made in this version that I liked, because the games are very similar and became known as "BOR CLONES").

So - this is a personal and unofficial opinion of the team - using this version is a great waste of time. I understand the nostalgia and the idea of running it on PS2, but the experience is suffering. I saw that they have adapted the Night Slasher X to this port, but I'm sure a lot of it is lost.

Don`'t get me wrong - I love the PS2 so much and I still have one and play on it sometimes.
 
Hi TN. Just to add my couple of cents here...

On paper the PS2 has enough CPU and RAM to run OpenBOR. After all the Dreamcast was supported for a long time, and a PS2 has roughly twice the numerical power. So looking at specs alone, it seems everything is fine. You couldn't play the more ambitious modules, but most of the catalog would work well. Unfortunately, it's just not that simple. Unlike the Dreamcast, PS2 has a very esoteric architecture (IIRC it's very similar to Silicon Graphic workstations). Point being, the PS2 is nothing at all like PC, and porting would be next to impossible without a specialized rebuild of OpenBOR. That's not going to happen, and even if it did most of the RAM and CPU power would be lost to overhead. Short version: You will never see OpenBOR modules played on the PS2 as they are.

Now as O Ilusionista said there is a PS2 port of the original BOR engine, but BOR is not OpenBOR. The only way to get an OpenBOR module to run on BOR is to systematically cut out whatever OpenBOR features the module used. That's not optimization, it's back porting, and the end result is not something I'd want to play on any platform.

Also as O Ilusionista said we don't want to discourage you. We're happy to have you here in the forum and respect your idea. We just want to be clear the specific thing you are asking for is not really feasible.

DC
 
Back
Top Bottom