Help with the internal timer that controls at chain

PS_VITA

Active member
Hey guys,

I have a set up of at chain using 1 2 3
But how exactly does one manipulate the speed that it takes from at chain 1 to chain 2 before openbor resets the behavior for at chain.

I know that at chain cant be reseted because is hard coded but is the timing also hardcoded?


Thanks for any script or examples that anyone could offer .
 
Timing isn't hardcoded, you can adjust it with this:
combodelay {int}

    This command sets interval time between attacks in default combo to perform combo attack by tapping attack button.
    Default to 100 which means 50 centiseconds. It means if player press attack button 2 seconds after 1st attack connects, the 2nd attack won't be a combo. However, if it's pressed almost half second later, 2nd attack will be combo
    Great to disable cheap infinite combo!
 
Bloodbane said:
Timing isn't hardcoded, you can adjust it with this:
combodelay {int}

    This command sets interval time between attacks in default combo to perform combo attack by tapping attack button.
    Default to 100 which means 50 centiseconds. It means if player press attack button 2 seconds after 1st attack connects, the 2nd attack won't be a combo. However, if it's pressed almost half second later, 2nd attack will be combo
    Great to disable cheap infinite combo!

In the manual combodelay is under "Generic Player properties "
But where in the manual does it say that these properties are to be placed inside the models.txt file?  Is it just common sense, if so than I'm an idiot.

Also, using my best educated guess , modifying combodelay will be for all my at chain attacks , correct? If so, than I'm also out of luck because I was hoping to mod one attack move not all.
 
Back
Top Bottom